Selection of a filter will refresh the page with new results. Filter (1)
1-2 of 2
1 - 2 of 2 Results
Related Products
Guide Gear 12 Volt ATV/UTV Spreader, 80-lbs. Capacity
Key Features
- Simple quick-connect mount system fits most ATV front or rear racks with lever gauge mounting to either side
- Easy-install wiring harness with on / off switch
- Sealed 12V motor mounted in the hopper
- Rust-proof polyethylene hopper
- Heavy-duty rain cover
- Broadcast width approximately 12'
- Capacity: 80 lbs.
- 22.5" x 16.5" x 14". 14 lbs.
Key Features
- Simple quick-connect mount system fits most ATV front or rear racks with lever gauge mounting to either side
- Easy-install wiring harness with on / off switch
- Sealed 12V motor mounted in the hopper
- Rust-proof polyethylene hopper
- Heavy-duty rain cover
- Broadcast width approximately 12'
- Capacity: 80 lbs.
- 22.5" x 16.5" x 14". 14 lbs.
Guide Gear ATV Broadcast and Spot Sprayer, 16 Gallon, 2.2 GPM, 12 Volt
Key Features
- Commercial-grade, 100% continuous duty rating
- 12V, 2.2 GPM, open-flow on-demand pump, 70 psi max.
- Honeywell MICRO SWITCH™
- Extra-thick UV and chemical-resistant 16-gallon tank
- 6" opening and tank drain
- Sprays, 14' wide swath, adjusts from cone to stream
- 19' vertical, 30' horizontal max. spray distance
- 15' clear PVC hose
Key Features
- Commercial-grade, 100% continuous duty rating
- 12V, 2.2 GPM, open-flow on-demand pump, 70 psi max.
- Honeywell MICRO SWITCH™
- Extra-thick UV and chemical-resistant 16-gallon tank
- 6" opening and tank drain
- Sprays, 14' wide swath, adjusts from cone to stream
- 19' vertical, 30' horizontal max. spray distance
- 15' clear PVC hose
Guide Gear UTV/ATV Receiver Mount Spreader Seeder, 80-lb.
Key Features
- Holds up to 1,900 cubic inches or 80 lbs.
- Mounts easily to your ATV/UTV's 2" receiver hitch
- Sealed 12V motor and rustproof hopper
- Controls are within easy reach of the driver's seat
- Rain cover
- 12' spreading width
- Measures 21"w. x 16.5"l. x 14.5"h.
- Weighs 40 lbs.
Key Features
- Holds up to 1,900 cubic inches or 80 lbs.
- Mounts easily to your ATV/UTV's 2" receiver hitch
- Sealed 12V motor and rustproof hopper
- Controls are within easy reach of the driver's seat
- Rain cover
- 12' spreading width
- Measures 21"w. x 16.5"l. x 14.5"h.
- Weighs 40 lbs.
Guide Guide Pro 125-lb. Spreader/Seeder
Key Features
- 125-lb. capacity poly hopper
- Broadcast spreader with 12' broadcast width
- Variable speed control spinner plate
- Sealed 12V motor rated to 570 RPM
- Operate the controls right from the driver seat
Key Features
- 125-lb. capacity poly hopper
- Broadcast spreader with 12' broadcast width
- Variable speed control spinner plate
- Sealed 12V motor rated to 570 RPM
- Operate the controls right from the driver seat