Increases accuracy by ensuring that your rifle is perfectly vertical before you pull the trigger. Mounts quickly and easily to rifle scope tube, and can accommodate both right and left-handed shooters.
Vortex Bubble Level for 1-Inch Riflescope Tube is rated 4.0 out of 5 by 9.
Rated 4 out of 5 by CurtB from Solid but not for low mountNice solid level and all was well until I realized it was resting on the rails. This is best suited for a two piece picatinny rail or for med or higher scope rings. Otherwise solid.
Date published: 2018-10-26
Rated 5 out of 5 by ALLINNICK from Works greatDoes it’s job well and is durable. Have had it for about 2 years and put through heck. Held up well still works as is it should.
Date published: 2018-03-29
Rated 4 out of 5 by Buckshot from Keeps ya' straight!This is a necessity for long range shooting. As the need for elevation adjustment increases so does the need for true vertical scope/bore alignment. If the vertical scope/bore alignment is not true, you will introduce an unwanted "windage" adjustment also. I would like to see the bubble to be a little more precision, to provide for a more accurate alignment. In my opinion, this would be primarily used for target shooting. This would not be very useful for most hunting situations, except for very long range.
Date published: 2017-12-08
Rated 5 out of 5 by Suerifle from Great itemBest little thing ever made. This greatly helped my stepson and wife shot a lot better. With this they keep the rifle more level and now their scope is zeroed in.
Date published: 2017-07-12
Rated 4 out of 5 by Steve from Excellent buyConceptually this is a good idea for shots out to 500 yards if ethical. I have used another brand before, but think I will like this one better. I have had some experience with canting rifle while experimenting with my rifles at long range and realize there is a cause and effect faulting to keep the rifle erect. Realistically I will crawl to a range that I am comfortable shooting.
Date published: 2015-08-24
Rated 4 out of 5 by Independentrealist from Good qualityI like the build and quality of the Vortex scope bubble I have a few of these on my rifles, I would like to have them a little smaller however and the liquid a little thicker in the vial I am nit-pickin now.
Date published: 2015-03-25
Rated 1 out of 5 by Smitty from Bubbe levelThe concept is right but there are situations you don't have the clearance to use this level on the optics. What is needed is one for the barrel some form of tapered device to accommodate the barrel diameter!
Date published: 2015-03-06
Rated 5 out of 5 by Silver49 from Useful ItemThe Vortex 1 Bubble Level is a necessary element when mounting a rifle scope. Most scopes are made of materials that are anti-magnetic, so simply placing an unsecured level on the scope usually will have it falling off, but not with this. While another level is needed to ensure the rifle also is level, this Vortex makes sure the scope itself is level, too. Once both the rifle and the scope are level, then you can tighten down the scope's ring screws, and know that it is pararel to the axis of the rifle barrel.