Designed to fit your Canik TP9, this ProMagTM Replacement Magazine offers guaranteed reliability and smooth-feeding action for your favorite pistol. Durable blued steel construction with 18-round capacity.
ProMag Canik TP9 Magazine, 9mm, 18 Rounds, Blued Steel is rated 2.9 out of 5 by 7.
Rated 4 out of 5 by Mike from Will feed a Canik TP9SFL but.....This mag will feed your canik no problem but it will not lock the slide open on the last round with consistency.
Date published: 2019-12-04
Rated 5 out of 5 by Bryan from Good product and good priceWorking and running in Canik SA as designed
Date published: 2019-10-21
Rated 1 out of 5 by Tyler from Not good quality.Do not like them. I ordered 2 and both have 2 issues i dont like. 1 is theres no drilled holes on the back to see number of rounds loaded in. And 2 is when you load them the sides of the mag bow out causing it to be a cery tight fitment when insertion.
Date published: 2019-10-15
Rated 2 out of 5 by mfrie01 from Doesn't Lock SlideOrdered two mags as the price was much lower that factory. Neither mag locks back the slide. The followers are a softer plastic than original equipment and the tab that actuates the slide lock doesn't push up high enough. Quality not as good as OEM, but I guess that's to be expected at 60% the price. Returning both.
Date published: 2019-06-01
Rated 1 out of 5 by eMc2 from Great priceI bought 3 mags two weeks ago(maybe three) and not one will fully load. After about rnd 7 wrattling gets really bad. More than once I started to unload a full mag (19 rnds max) to find the rnds have twisted and turned upside down.
Date published: 2019-04-01
Rated 4 out of 5 by bill from Great for the range $Not as nice as factory mec gar Price makes em a must have at the range
Date published: 2019-02-14
Rated 3 out of 5 by GARY from Ok But one issueThis magazine does not lock the slide back the follower is wrong or there is too much play in the slot on the side that locks the magazine in place. I bought 4 mags none locked it back so I took the followers out of my Beretta 92fs mags and they worked fine because the notch on the side of the follower is higher and pushes the slide lock up. In the end I didn't save any money because I had to order Beretta followers to put back in my Beretta mags live and learn. Someone should let ProMag know.
Please keep questions relative to the product. If you have questions regarding availability (Back Order, In Stock, Pricing, etc.) please contact SG Customer Service at [email protected]